This is a brand new model to be manufactured for a private owner in Upper Cam, Glos.

The  bell is a former dinner bell, cast by a generic aluminium foundry. It weighs 1.5oz, and produces the note C#.

The bell will be hung with 3D-printed fittings.

This is a brand new model to be manufactured for a private owner in Upper Cam, Glos.

The  bell is a former dinner bell, cast by a generic brass foundry. It weighs 1.5oz, and produces the note Bb.

The bell will be hung with 3D-printed fittings.

This is a brand new model to be manufactured for a private owner in Burnham-on-Sea, Somerset.

The  bell is a former servant's bell, cast by James Barwell. It weighs 1lbs 1oz, and produces the note F.

The bell will be hung on an extruded-aluminium headstock in a timber bell frame.  It's current clapper will be re-used. A wooden wheel will be manufactured.

This is a brand new model to be manufactured for a private owner.

The  bell is a former pub bell, cast by a generic brass foundry. It weighs 3lbs 9oz, and produces the note E.

The bell will be hung on an extruded-aluminium headstock in a timber bell frame.  It will also have a counter-balanced clapper manufactured and wooden wheel. A rope will also be ordered near completion.

This is a brand new model to be manufactured for a private owner.

The  bell is a former fire-engine's bell, cast by a generic brass foundry. It weighs 14lbs 9oz, and produces the note E.

The bell will be hung on an extruded-aluminium headstock in a timber bell frame.  It will also have a counter-balanced clapper manufactured and wooden wheel. A rope will also be ordered near completion.

This is a brand new model, being manufactured for the ringing chamber of a bell tower, yet to be confirmed, in Cambridge.

The  bell being used is a redundant hand bell, with a diameter of 102mm (size 11) and produces the note G.

The bell has already had its argent removed, and the inside sand-blasted.

The bell will be hung on an extruded-aluminium headstock with a wooden wheel, and hung in a wooden bell-frame. A new clapper will also be manufacuted.

This is a brand new model, being manufactured for the ringing chamber of a bell tower, yet to be confirmed.

The  bell has been donated from the bell tower, and is a brass bell, with a diameter of 103mm and produces the note Eb.

The bell has already had its argent removed, and clapper drilled out, and will be reused for the model.

It's extruded-aluminium headstock has been manufactured and is now mounted to the bell. Next to be made is the bell wheel.

This is a brand new model, being manufactured for the ringing chamber of St Mary's, Frampton.

The  bell is a brass bell, a diameter of 86mm, weighs 5oz and produces the note D.

It's 3D-Printed headstock has been manufactured. Next to be manufactured will be its wheel, followed by the bell frame and clapper.

This is a brand new model to be manufactured for a private owner in Cambridge.

The  bell is a brass bell, cast by a generic brass foundry. It weighs 1lbs 15oz, and produces the note Bb.

The headstock has been manufactured. The wooden wheel has been manufactured & fitted. Next is the timber bell frame to be manufactured, followed by its counter-balanced clapper. A rope will also be ordered near completion.

This is a brand new model, being manufactured for the ringing chamber of St Boniface, Bunbury.

The  owner has given me an old redundant handbell to use for the model. It is a size 12 and tuned to the note F.

The bell has already had its argent and clapper modified for hanging. The bell was sent off to Benfield Bells to be cleaned and polished. 

Next, it will be hung on an extruded-aluminium headstock and will be hung in a timber bell frame with a wooden wheel.

This is a brand new model, being manufactured for the ringing chamber of Bathurst Cathedral, NSW, Australia.

The  bell is a brass bell, a diameter of 70mm, weighs 5.75oz and has been retuned to the note Ab.

The bell has already had a sand blast and been retuned to improve its resonance. The headstock & clapper have been manufactured. Next is the wheel to be manufactured, followed by the timber bell-frame.

This is a brand new model to be manufactured for a young keen bell ringer in Devon.

The  bell is the owner's bell, which is a brass bell, cast by an unknown founder, has a diameter of 59mm, weighs 2oz and is note F.

The headstock , wheel & plain-bearings have been 3D-Printed. Next to be manufactured is bell frame.

This is a brand new model to be manufactured for a private owner in Stroud, Glos

The  bell is a brass bell, cast by a generic brass foundry. It weighs 2lbs 9oz, and produces the note C. 

The bell will be hung on an extruded-aluminium headstock in a timber bell frame.  It will also have a counter-balanced clapper manufactured and wooden wheel. A rope will also be ordered near completion.

This is a brand new model, being manufactured for the ringing chamber of St George's,  Upper Cam.

The  bell is a bronze bell, a diameter of 82mm, weighs 7.75oz and is note E.

The cast-in clapper and argent has been removed. The bell has been sand-blasted.  The headstock has been manufactured. Next to be manufactured is the bell frame, followed by its clapper and bell rope.

This is a brand new model, currently being manufactured for a private owner in Portland, Oregon, USA.

The  bell is a brass bell, cast by a generic brass foundry. It weighs 2lbs 11oz, and produces the note B.

The bell is hung on a shouldered extruded-aluminium headstock with self-aligning ball bearings. The wheel has been manufactured. The bell frame is next to be manufacured, followed by the clapper and bell rope.